Product DescriptionSharkBite is the Push-Fit connection system that’s really taking hold. It's the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless...

Product Description1/2" Pex TeeSpecifications Material: Brass Size: 1/2'' Type: Tee

7/8" Fiberglass Fire Door Rope. 7/8 inch fiberglass fire door seal rope 8 feet long.

Laminated solenoid, replacement for all WoodMaster models, pull-type continuous duty cycle rated at 25 Degree constructed of durable laminated steel with corrosion-resistant frame & Plunger. Solenoids have polyester or nylon bobbins, encapsulated or taped coils, steel Plunger springs, & brass...

Product DescriptionThis is a blower compatible with the direct replacement Draft Fan for the Cozeburn & Empyre Wood Boilers for the 650 Model. Direct drive CFM 250, Amps 1.0, 115V, 50 /60HZ, RPM 3000, single-speed sleeve bearing thermally protected includes...

Product Description MFKitssr This kit was designed for manual refill of your boiler. It is most often used with open loop systems. All fittings shown are included in the kit to simplify the order process and to get those hard-to-find parts....

5/8" Fiberglass Fire Door Gasket Rope - 100Ft

Product Description3/4" Sw. TeeSpecifications Width: 3/4" Material: Copper Type: Tee

Product Description3/4" Sw. Street 90Specifications Width: 3/4" Material: Copper Type: 90 degree Sw. Street

Product Description1" 45 Degree Sw. ElbowSpecifications Width: 1" Material: Copper Type: 45 degree Elbow

Product DescriptionPEX crimping system is among the oldest, most reliable and most widely used methods of installing PEX. Copper crimp rings ensure full 360˚ compression of the pipe over the barbs of the fitting without the risk of expansion or...

Product Description1/2" Pex x 3/4" MPTSpecifications Material: Brass Size: 1/2" Pex x 3/4" MPT Type: Connector FeaturesLead free

Product Description1/2" Pex x 1/2" MPT ConnectorSpecifications Material: Brass Size: 1/2" Pex x 1/2" MPT Type: Connector FeaturesLead free

Product Description SharkBite® PEX tubing is a cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red) and with an oxygen barrier...

Product Description The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool...

IW1203 Copper Immersion Well 1/2" MPT- These are most commonly used with Aquastats. 1/2” MPT, 3" max insertion/bulb length. Bulb diameter 3/8", Insulation depth 1". May be used with SKU: AQ11D18-1

AmTech 300 Boiler Treatment - Has been designed to be used in boiler treatment programs at a lower cost. These programs insist the boiler owner meet certain nitrite levels in order to comply with warranty requirements in regards to boiler...

Product DescriptionManual By-Pass Kit. This kit was put together for a manual by-pass of a water to air space heater or any other heat exchanger you would like to by-pass. All fittings shown are included in the kit to simplify...

The VU843 Fan Coil Valve Actuators are used in conjunction with the VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors....

Product Description BBkitICsb Brazed Boiler Kit with Internal Coil Kit with SharkBite Fittings was designed to be used with the brazed plate exchanger and boilers with internal domestic coils. All part & fittings shown are included in the kit to...

Product DescriptionSharkBite® PEX tubing is a cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red) and with an oxygen barrier for...

Product DescriptionMFKitsb. This Manual Feed Kit was designed for manual refill of your boiler. It is most often used with open loop systems. All fittings shown are included in the kit to simplify the order process and to get those...

Product Description3/4" x close Black NippleSpecifications Dimensions: 3/4" width Material: Black Malleable Type: Threaded

Product Description1/2" x close Black NippleSpecifications Dimensions: 1/2" width x close length Material: Black Malleable Type: Threaded