DAYTON 1TDP7 PSC Blower, Draft Fan, 115 Volt, 146 CFM

Item         PSC Blower
Type         Forward Curve, Direct Drive
Wheel Dia. (In.)         3-15/16
Wheel Width (In.)         2-1/2
CFM @ 0.000-In. SP         146
CFM @ 0.100-In. SP         140
CFM @ 0.200-In. SP         126
CFM @ 0.300-In. SP         124
CFM @ 0.400-In. SP         120
CFM @ 0.500-In. SP         110
Voltage         115
Hz         50/60
Phase         1
Full Load Amps         0.75
RPM         3100
Bearing Type         Ball
Motor Type         Permanent Split Capacitor
Motor Enclosure         Open
Motor Insulation         Class B
Thermal Protection         Auto
Lead Length (In.)         13
Conduit Box         Yes
Ambient Temp. (Deg. F)         104
Max. Inlet Temp. (Deg. F)         104
Inlet Dia. (In.)         3-1/8
Outlet Height (In.)         2-3/16
Outlet Width (In.)         3-1/4
Overall Height (In.)         5-3/4
Overall Width (In.)         6-5/16
Overall Depth (In.)         5-3/8
Mounting         All Position
Housing Finish         Gray Enamel
Housing Material         Rolled Steel
Agency Compliance         UL Recognized US and Canada (E47479)
Replaces         4C446
Includes         Discharge Mounting Flange

    30 to 312 CFM PSC, Shaded Pole, DC, and 3-Phase Blowers, Rectangular Outlet
    Dynamically balanced blowers provide smooth and quiet operation.
    Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. UL and C-UL Recognized (E47479), except No. 2C646 is not UL or C-UL Recognized, and No. 2C647 is UL Recognized (E22286) and CSA Certified (LR12645).

    Direct replacements for many OEM blowers with same physical footprint
    All-position mounting
    Min./max. operating temp. range: -20 Degree to 104 DegreeF
    Max. inlet and ambient temp.: 104 DegreeF
    Motor enclosure: open

    Note: Not for use with speed controllers.