Maintenance Kit - 4400 Includes Fire Rope for 4400, one FC546, RTV Silicone and One Gallon Amtech 300
The WoodMaster 4400 Yearly Maintenance Kit has everything you will Need to Tune Up your WoodMaster!
The Yearly Maintenance Kit Includes:
- Fire Rope
- Silicone (to mount Fire Rope and Seal around Chimney and other areas if needed)
- Fan Cover
- AmTech Boiler Treatment
WoodMaster recommends that all these parts be replaced Yearly!
This will greatly prolong the life of your Fans/Blowers and make your WoodMaster run like the day you bought it. You should drain all the water and refill your WoodMaster with fresh water also before adding the Boiler Treatment in. The whole job of replacing the maintenance parts should only take about 20 minutes. Easy Job... Be Self-Sufficient...
This Kit is all you need to keep your WoodMaster 4400 model running like the day you bought it! Doing yearly maintenance is key in keeping your wood boiler running clean and efficiently year after year. The Kit includes: 1- 10 oz. Black RTV Silicone, 1 - FC546 fan cover, 8 feet- 1 inch fire rope for the door and 1 gallon - Amtech 300 Boiler treatment that treats 300 gallons (2 years worth (1/2 gallon a year is all you need). The AmTech300 has 2 Levels protection for the wood boiler. It offers 2 Active ingredients for Protection. It will protect boiler from rust, corrosion and scale. It will balance pH and alkalinity. It is designed to work just as well as any other brand name without the premium price.
WoodMaster 4400 furnace
- To replace FC546 fan cover, take the four screws out that hold cover over fan out and remove cover. Use 1/4" wrench to remove screws that are holding fan cover to fan and unhook old fan cover from laminated solenoid LS001. Change fan cover and do directions backwards.
- To install fire rope simply pull out old fire rope, scrap the area clean, apply bead of silicone in the channel and add rope. Yes it is that easy!