Dayton Blower Model 1Tdn5 54 Cfm 3340 Rpm 115V 60/50Hz (4C012)
Dynamically balanced, the Dayton Blower 1TDN5 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer service life.
Note: Not for use with speed controllers
OEM Blower, Outlet Shape Rectangular, With/Without Flange With Flange, Wheel Dia. 2-15/16", Wheel Width 1-7/8", CFM @ 0.000-In. SP 53, CFM @ 0.100-In. SP 52, CFM @ 0.200-In. SP 50, CFM @ 0.300-In. SP 47, CFM @ 0.400-In. SP 41, CFM @ 0.500-In. SP 23, Voltage 115, Hz 50/60, Phase 1, Full Load Amps 0.30, RPM 3388, Bearing Type Ball, Motor Type Permanent Split Capacitor, Motor Enclosure Open, Motor Insulation Class B, Thermal Protection Auto, Lead Length 13", Conduit Box No, Max. Ambient Temp. 104 Degrees F, Max. Inlet Temp. 104 Degrees F, Inlet Dia. 2-9/16", Outlet Height 1-5/8", Outlet Width 2", Overall Height 4-5/8", Overall Width 4-11/16", Overall Depth 4-1/2", Wheel Type Forward Curve, Drive Type Direct, Mounting Position All Position, Housing Finish Enamel, Housing Material Rolled Steel, Housing Color Gray, Agency Compliance UL Recognized US and Canada (E47479), CE, Replaces 4C012, Includes Discharge Mounting Flange.
- CFM @ 0.000-In SP: 54
- 115 Volts, 50-60 Hz, 1 Phase
- Max Ambient Temp: 104 Deg F
- Operating Amps: 1.4
- Full Load Amps: 0.3
- Motor RPM: 3340
- Automatic Overload Protection
- Dynamically balanced blowers provide smooth and quiet operation.
- Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.
- UL Recognized US and Canada (E47479), CE.
- Direct replacements for many OEM blowers with same physical footprint
- All-position mounting
- Min./max. operating temp. range: -20 Degree to 104 DegreeF
- Motor enclosure: open
- Non Reversible
- Includes discharge mounting flange
- Replaces 4C012
C Purdy says:
Write Your Own Review
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
|Dimension K:||3-1/8"||Motor Type:||Permanent Split Capacitor|
|Hz:||50/60||Housing Material:||Rolled Steel|
|Voltage:||115||Agency Compliance:||UL Recognized US and Canada (E47479), CE|
|Housing Finish:||Enamel||CFM @ 0.000-In. SP:||53|
|Full Load Amps:||0.30||CFM @ 0.100-In. SP:||52|
|Includes:||Discharge Mounting Flange||CFM @ 0.200-In. SP:||50|
|Item:||OEM Blower||CFM @ 0.300-In. SP:||47|
|California Prop 65 Orange Label:||This product contains a chemical known to the State of Californi||CFM @ 0.400-In. SP:||41|
|California Prop 65 White Label:||This product contains a chemical known to the State of Californi||CFM @ 0.500-In. SP:||23|