Taco 007 BF5-J Circulating Pump ( Cast Iron with Bronze Cartridge)
The Taco 007 Cartridge Circulator is the most popular hydronic circulator sold today. With its field serviceable cartridge design, the compact 007 provides quiet, efficient operation and unmatched reliability. The self-lubricating, maintenance-free design and flow characteristics make it the ideal hydronic circulator for a wide range of applications.
The Taco 007 BF5-J, the residential circulator is designed for use in hot water heating systems and is used in circulating zones in-floor heat and baseboard. The unique replacement cartridges (SKU: RC007) deliver direct drive are serviced without replacing are self-lubricating and require no maintenance. Maximum load: 150' of a run at 8' of lift w/ 1" I.D. water line. Circulating pump (115 volts).
These “J” pumps were designed for open & closed systems due to the amount of oxygen in the systems. The Bronze cartridge prevents the pump from deteriorating due to oxygen in the water system. This ensures a long pump life! All these pumps are cast iron with a bronze cartridge. Not for potable water use. These pumps can replace standard “00” pumps.
Max Flow: 20 GPM, Max Head: 11 Feet, Minimum Fluid Temperature: 40 degrees F (4 degrees C),Maximum Fluid Temperature: 230 degrees F (110 degrees C),Maximum Working Pressure: 125 PSI, Volts: 115; Power frequency HZ- 60, Amperage: .76; RPM: 3250; HP: 1/25; Connection Sizes: 3/4", 1”, 1-1/4" Flanged; Model Nomenclature : BF – Bronze, Flanged Variations: J – Bronze Cartridge with Cast Iron Casing.
***Rubber gaskets included with pump***
The Taco 007 is a cartridge style, maintenance-free, wet-rotor, in-line, single stage circulator. It is designed for quiet operation in Hydronic Heating, Radiant Heating, Hydro-Air Fan Coils, Indirect Water Heating, Chilled Water cooling, and Domestic Water Systems. Available in Cast Iron or Bronze construction with universal flange to flange dimensions. The unique replaceable cartridge (RC007) contains all of the moving parts and allows for easy service, instead of replacing the entire circulator. Ideal for a wide range of applications.
- Standard High Capacity Output Compact Design
- Quiet, Efficient Operation
- Unique Replaceable Cartridge Design-Field Serviceable (SKU: RC007)
- Direct Drive-Low Power Consumption
- No Mechanical Seal
- Unmatched Reliability --Maintenance Free
- Universal Flange-to-Flange Dimensions
Hot Water says:
Do it yourself says:
Southern, IN DIY wood burner. says:
was broke down says:
Heat Now says:
Write Your Own Review
Selecting the Correct Circulator: Download PDF >>
Installation Instructions: Download PDF >>
Data Sheet: Download PDF >>
- Hydronic Heating
- Radiant Heating
- Hydro-Air Fan Coils
- Indirect Water Heating
- Chilled Water Cooling
- Domestic Water Systems
- Flow Range: 0-20 GPM
- Head Range: 0-11 Feet
- Minimum Fluid Temperature: 40 degrees F (4 degrees C)
- Maximum Fluid Temperature, Cast Iron: 240 degrees F (115 degrees C)
- Maximum Fluid Temperature, Bronze: 230 degrees F (110 degrees C)
- Maximum Working Pressure: 125 PSI
Connection Sizes: 3/4", 1", 1-1/4", 1-1/2" Flanged