Product DescriptionDynamically balanced, this Blower, compatible with Dayton 1TDP5, mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less...

Product DescriptionDynamically balanced, the Dayton 1TDN6 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. OEM Blower, Outlet Shape Round, With/Without Flange Without Flange, Wheel Dia. 3", Wheel Width 1-7/8",...

Product DescriptionThis Blower has a wheel reinforced to ensure optimal performance and trouble-free service, and a discharge that can be rotated in four 90° increments. Model has a heavy-gauge, steel blower housing and steel wheels. Unit can replace most direct-drive...

Product DescriptionMahoning BlowerCompatible with Mahoning models 400, 500Draft Fan with DamperConnects with a retangular flangeShaded Pole Blower, Air Flow @ 0.000 Inch Static Pressure 148 CFM, RPM 3100,Voltage Rating 115 Volts, Current Rating 1.37 Amps, Frequency 60/50 Hertz, Thermal Protection...

Product DescriptionMahoning Blower & Damper4C444 & 1TDR7

Product Description This is a blower compatible with the direct replacement Draft Fan for the Cozeburn & Empyre Wood Boilers for the 250 and 450 models NBK Blower / Fan for: Aqua-Therm 145 and 345 (back), Empyre 250 & 450, Cozeburn...

Product DescriptionDynamically balanced, the NBK Blower, compatible with the Dayton model FN1TDP3 (4C443), mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat...

Product DescriptionDynamically balanced, the NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer...

Product DescriptionActing as a direct replacement for many OEM blowers with the same physical footprint, this dynamically balanced blower provides smooth and quiet operation. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. The...

Product DescriptionDynamically balanced, the NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer...

Product DescriptionDynamically balanced, this NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime...

Product DescriptionDynamically balanced, the NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer...

Product DescriptionDynamically balanced, the NBK Blower Replacement for the Dayton 4C442 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation...

Product DescriptionDynamically balanced, the NBK Replaces the Dayton 6FHX8 (4C446) Blowers, mounts in any position and operates with minimal noise and vibration to maintain CFM at higher static pressures. This is probably the most used blower in the outdoor wood...

Product DescriptionDynamically balanced, the NBK Blower Replaces Dayton Model 1TDN3 mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Note: Not for use with speed controllers. Performance Data- CFM @ 0.000-In...

(This Fan is used on the Shaver Wood Furnace) Also used for many other applications. .This fan is cross referenced with the models below:Dayton 1C180, 4C440, 1TDN7, Fasco 7021-3466, 50747-D401, 50747-D500, 6FHX4, 7021-7841 (England Stove), 7021-9258 (NESCO), 7021-8768, Lopi Coal...

Product DescriptionDynamically balanced, the NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Note: Not for use with speed controllersPerformance Data CFM @ 0.000-In SP: 133 230 Volts, 50-60...

Product DescriptionDynamically balanced, the NBK Blower Replaces Dayton 1TDT2 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Note: Not for use with speed controllersPerformance Data CFM @ 0.000-In SP:...

Product DescriptionDynamically balanced, the NBK Blower Replaces Dayton Models 1TDR3 (4C447) Blower mounts in any position and operates with minimal noise and vibration to maintain CFM at higher static pressures. Dayton Blowers 1TDR3 PSC Draft Fan Blower, 115 Volt. The...

Product DescriptionThis OEM blower features a rectangular outlet shape and is designed with a flange. It features a shaded-pole motor and a totally enclosed motor enclosure. It offers all-position mounting. Steel housing material with painted housing finish.Typical ApplicationsThis Fan is...

Product DescriptionDynamically balanced, the NBK replaces Dayton Blower 1TDP1 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection,...

Product DescriptionNBK Blower replaces Fasco A166 702111307 / 7021-11307- Direct Drive, CFM 145, Amps 0.68/0.75. 115 V. 50 / 60 HZ. RPM 2720/3120 single speed, sleeve bearing, thermally protected, shaded pole. It is suitable for use in heating and ventilation...