Dayton 6Fhx8 Blower, 148 Cfm, 115V, 3160 Rpm, 4C446 Replacement
Product Description
Dynamically balanced, the Dayton 4C446 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures.
This is probably the most used blower in the outdoor wood furnace industry.
Typical Applications
This Fan is used on the WoodMaster 4400 & 5500, HeatSource Model 1000 & Taylor T-750, This Fan is also used on the Heatmor 200css & 400css, Heatmore 200SSR2 &400SSR2, Johnson John (Jr models), Freedom Outdoor Eliminator and many other applications.
Performance Data
- CFM @ 0.000-In SP: 148
- 115 Volts, 50-60 Hz, 1 Phase
- Max Ambient Temp: 104 Deg F
- Full Load Amps: 1.37
- Motor RPM: 3160
- Dimensions: Wheel diameter 3 13/16'', wheel width 2 1/2'', inlet diameter 3 1/8''
Features
- Automatic Thermal Protection
- Noise and vibration are held to a minimum to maintain CFM at higher static pressures.
- Direct replacements for many OEM blowers with the same physical footprint
- All-position mounting
- Lead Length 6"
- Min./max. operating temp. range: -20 Degree to 104 Degree F
- Blower Outlet Shape: Rectangular
- Discontinued and replaced by Dayton 1TDP7
Customer Reviews
Bruce says:
Posted on 3/30/2020
Old blower finally died $20 less than local dealer Jeff says:
Posted on 2/28/2020
Replacement Jon says:
Posted on 1/29/2020
The fan on my woodmaster 4400 quit working. Todd says:
Posted on 1/24/2020
Seemed to be a reasonable price based upon other suppliers I reviewed. Hopefully is exactly the part I need. If all works out, will be doing more business with this vendor for my wood boiler needs. woodchuck says:
Posted on 1/22/2020
spare for heatmaster Tim says:
Posted on 1/20/2020
Replacement for WoodMaster 4400. Jamie says:
Posted on 1/17/2020
Replacement Ron says:
Posted on 12/31/2019
original fan quit Heatmor Wood Stove says:
Posted on 12/18/2019
replacement and extra blower fan on hand just in case Faith says:
Posted on 12/17/2019
I feel confident in ordering with you and you had the best price. Tom says:
Posted on 12/17/2019
replacement Mary says:
Posted on 11/21/2019
replace an old broken one wrangler says:
Posted on 11/16/2019
eight years old finally quit karenkay says:
Posted on 11/4/2019
Our motor went out and the dealer that we purchased from doesn't sell the brand anymore Midwest Farmer says:
Posted on 10/22/2019
Gummed up my old one on a DIY stove build and wanted to replace now that I got it figured out “thanks to theses guys”. So I bought it here. Scooter says:
Posted on 10/7/2019
Needed a good fan blower need to replace the old one Canty’s says:
Posted on 10/2/2019
We own Heatmaster stoves DORONDA says:
Posted on 9/27/2019
JUST INCASE MY BLOWER GOES OUT ITS A REPLACEMENT. USUALLY GO THROUGH THIS EVERY OTHER YEAR Rebecca says:
Posted on 9/15/2019
Backup to our current blower as it is making noises like it's about to die Brian says:
Posted on 8/29/2019
Replacement unit for Heatmor 200css original blower fan Martin says:
Posted on 8/29/2019
Used one before worked really good Tammy says:
Posted on 7/14/2019
this is the second one we have gone thru rich says:
Posted on 3/6/2019
need replacement WoodMaster stove says:
Posted on 3/4/2019
Got it to replace the blower fan on my wood master 4400 H says:
Posted on 2/5/2019
Just in case. Two is one, one is none. Rob38 says:
Posted on 1/28/2019
Comments apply to all products purchased this time around. Good value, good technical support, quick ship. mike f. says:
Posted on 1/21/2019
exact part i needed at best price Don says:
Posted on 1/18/2019
The blower in my wooddoctor furnace stopped working. Bernard says:
Posted on 12/28/2018
Good quality and price. Dogface says:
Posted on 12/23/2018
Right part, right price Ben says:
Posted on 11/27/2018
it is what I needed Fan says:
Posted on 11/20/2018
Best pricing and deal on of them. swiedenbeck2012 says:
Posted on 11/5/2018
Replacement for our wood stove. Edward says:
Posted on 10/29/2018
Original blower motor failed after fifteen years of service, not a bad run. I hope this one lasts as long. Steve says:
Posted on 10/23/2018
Thank you! Terry says:
Posted on 10/20/2018
We have a WoodMaster 4400. Blower is out. Need to burn wood to heat the house. Wish you had a you tube video on replacing this blower Dawn says:
Posted on 10/8/2018
We are new home owners where the Woodmaster 4400 came with the house. The motor blew yesterday and you are local where I will get this tomorrow. Need hot water and heat!! BOB says:
Posted on 9/28/2018
NEED A QUIET MOTOR JW says:
Posted on 9/24/2018
Previous purchase from company Paulie611 says:
Posted on 9/18/2018
original motor went after 10 years Wayne says:
Posted on 8/16/2018
heavy duty built. Kenneth says:
Posted on 4/7/2018
Purchased previously Burner says:
Posted on 3/27/2018
First in 10 years Juan says:
Posted on 2/28/2018
Use this part on all three of our 6500 woodmaster and they continue to fail.:(
Juan
Socket Man says:
Posted on 2/16/2018
Goes in a Heatmor 200 that is 14 years old. Maria says:
Posted on 1/31/2018
We need this part for our outdoor wood boiler. Camel says:
Posted on 1/26/2018
My old one was worn out. Motor wouldn't run anymore. IL coldweather says:
Posted on 1/22/2018
Needed replacement. Glad to replace anything reasonable. 4400 Woodmaster is great product so far. It's 12 years old and still going. Bernard says:
Posted on 1/8/2018
Bought as a spare, I thought the fan was an excellent product at good price. Paspeeder says:
Posted on 1/8/2018
Motor bearing is going bad. I have to keep spraying the bearing with lubricant. Randall says:
Posted on 1/8/2018
Our blower motor has given out and this seems to be a quality product for the price. Robert says:
Posted on 1/6/2018
Wanted to have a back up, and this looks like the original, but you do not list Portage and Main as one it fits. Hoping this will work. Kenneth says:
Posted on 1/4/2018
Purchased before Jenna says:
Posted on 1/4/2018
need a replacement for the blower we have. feel like we just bought one..... Mark says:
Posted on 12/27/2017
Convenient, fast shipping & delivery! WVPapa says:
Posted on 12/16/2017
Electric magnet failed to adjust air intake causing fan to overheat and the bearings went out. Chad says:
Posted on 12/5/2017
Quality products at a fair price. Customer service is top notch Hodag1 says:
Posted on 11/30/2017
Availability Michael says:
Posted on 10/30/2017
Needed a new fan. Your website is so helpful. Much more user friendly and helpful than the suggested Heatmor dealer we have used in the past. Write Your Own Review
| Item | OEM Blower | |
| Type | Forward Curve, Direct Drive | |
| Wheel Dia. (In.) | 3-13/16 | |
| Wheel Width (In.) | 2-1/2 | |
| CFM @ 0.000-In. SP | 148 | |
| CFM @ 0.100-In. SP | 141 | |
| CFM @ 0.200-In. SP | 135 | |
| CFM @ 0.300-In. SP | 129 | |
| CFM @ 0.400-In. SP | 121 | |
| CFM @ 0.500-In. SP | 114 | |
| Voltage | 115 | |
| Hz | 60/50 | |
| Phase | Single | |
| Full Load Amps | 1.54/1.37 | |
| RPM | 3160 | |
| Bearing Type | Sleeve | |
| Motor Type | Shaded Pole | |
| Motor Enclosure | Open Dripproof | |
| Thermal Protection | Auto | |
| Lead Length (In.) | 6 | |
| Conduit Box | Yes | |
| Ambient Temp. (Deg. F) | 104 | |
| Max. Inlet Temp. (Deg. F) | 104 | |
| Inlet Dia. (In.) | 3-1/8 | |
| Outlet Height (In.) | 2-1/16 | |
| Outlet Width (In.) | 3-1/4 | |
| Overall Height (In.) | 5-3/4 | |
| Overall Width (In.) | 7-1/2 | |
| Overall Depth (In.) | 5-5/16 | |
| Mounting | All Position | |
| Housing Finish | Gray Baked Enamel | |
| Housing Material | Steel | |
| Agency Compliance | UL Component Recognized, CSA Certified |
Free Shipping On All Orders Over $199.99 (Continental US Only)
