Product Description
AmTech 300 Boiler Treatment - Has been designed to be used in boiler treatment programs at a lower cost. These programs insist the boiler owner meet certain nitrite levels in order to comply with warranty requirements in regards to boiler corrosion protection. Adding 1 gallon of AmTech 300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite. Suggested nitrite levels are: 750ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great. Dose system accordingly on required control levels set by your boiler manufacturer and your system's nitrite need based on test results. Do it yourself test kits are available, see the AmTech 300 Test Kit. The manufacturers can't tell the difference if you're using their expensive brand or our AmTech 300, so send it into their labs to be tested without worry. AmTech 300 Boiler Treatment will: Protect your wood boiler from rust, corrosion, and scale Balance pH and Alkalinity Meets or exceeds all boiler manufacturer nitrite warranty requirements Don't pay a premium just for a brand name - one gallon of AmTech 300 Boiler Treatment will treat 300 gallons of fill water and maintain a 1000ppm nitrite level. However, like any other boiler treatment chemical, you must dose your treatment based on the needs of your system.
Typical Applications
Outdoor wood furnaces and boilers
Features
- Protect your wood boiler from rust, corrosion, and scale
- Each one gallon bottle treats 300 Gallons
- Balance pH and Alkalinity
- Meets or exceeds all boiler manufacturer nitrite warranty requirements
- This offer includes 2 Gallon Bottles of AmTech 300 Boiler Treatment & test kit
AmTech 300 Wood Boiler Water Treatment is an inexpensive alternative to brand-name boiler treatment chemicals at half the cost and offers better protection. In Fact it Offers 3 Levels of protection and is the only product to do so.
AmTech 300 Protects Cast Iron, Steel and Stainless Steel
The 3 Protection “Levels”
- Nitrite
- Phosphonate
- Anodic inhibitor
Our AmTech 300 Boiler Treatment will:
- Protect your wood boiler from rust, corrosion, and scale
- Balance pH and Alkalinity
- Meets or exceeds all boiler manufacturer nitrite warranty requirements
Don't pay a premium just for a brand name - one gallon of AmTech 300 Boiler Treatment will treat 300 gallons of fill water and maintain a 1000ppm nitrite level. However, like any other boiler treatment chemical, you must dose your treatment based on the needs of your system.
You can determine the needs of your system by testing your boiler water using one of our AmTech 300
Remember, the manufacturer's can't tell if you used their expensive brand or AmTech 300 - why pay more?
Shaver Wood Furnace and many other companies recommends this product Only!
RELATED PRODUCTS
