Free Shipping On All Orders Over $199.99 (Continental US Only)
Your search for "{{ terms }}" did not yield any results.
Showing 23 products
PRODUCT TYPE: Wood Furnace Parts & Accessories
MANUFACTURER: Dayton
Product DescriptionDynamically balanced, this Blower, compatible with Dayton 1TDP5, mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less...
MANUFACTURER: NBK
Product DescriptionDynamically balanced, the Dayton 1TDN6 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. OEM Blower, Outlet Shape Round, With/Without Flange Without Flange, Wheel Dia. 3", Wheel Width 1-7/8",...
MANUFACTURER: AH&S
Product Description This commercial direct-drive exhaust fan is designed to quietly exhaust high volumes of air for ventilating schools, offices, storage facilities, and light manufacturing assembly areas. It features a galvanized frame and finish, and is quiet speed-controllable for school...
Product Description Exhaust Fan, Medium Duty Direct Drive, Propeller Dia 16 In, 1765 CFM; Max Ambient Temp 104 Deg F, 115 Volts, 60 Hz, 1 Phase, Operating Amps 1.10, Motor RPM 1000, Aluminum Blades, Height 20 In, Width 20 In,...
Product Description Exhaust Fan, Medium Duty Direct Drive, Propeller Dia 18 In, 2294 CFM; Max Ambient Temp 104 Deg F, 115 Volts, 60 Hz, 1 Phase, Operating Amps 1.5, Motor RPM 110, Aluminum Blades, Height 22 In, Width 22 In,...
Product Description Exhaust Fan, Medium Duty Direct Drive, Propeller Dia 20 In, 2832 CFM @ 0.000-In SP, Max Ambient Temp 104 Deg F, 115 Volts, 60 Hz, 1 Phase, Full Load Amps: 2.7, Motor RPM 1020, Aluminum Blades, Height 24...
MANUFACTURER: Alternative Heating & Supplies
FC546 Fan Cover is an simple device that works effectively on keeping the air out and saves wood and reduces smoke. This is a rubber fan cover that covers most Dayton Fans to stop the air flow into wood furnaces. This is...
MANUFACTURER: vendor-unknown
Product DescriptionThis Blower has a wheel reinforced to ensure optimal performance and trouble-free service, and a discharge that can be rotated in four 90° increments. Model has a heavy-gauge, steel blower housing and steel wheels. Unit can replace most direct-drive...
Product Description This is a blower compatible with the direct replacement Draft Fan for the Cozeburn & Empyre Wood Boilers for the 250 and 450 models NBK Blower / Fan for: Aqua-Therm 145 and 345 (back), Empyre 250 & 450, Cozeburn...
Product DescriptionDynamically balanced, the NBK Blower, compatible with the Dayton model FN1TDP3 (4C443), mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat...
Product DescriptionDynamically balanced, the NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer...
Product DescriptionActing as a direct replacement for many OEM blowers with the same physical footprint, this dynamically balanced blower provides smooth and quiet operation. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. The...
Product DescriptionDynamically balanced, this NBK Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime...
Product DescriptionDynamically balanced, the NBK Blower Replacement for the Dayton 4C442 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation...
Product DescriptionDynamically balanced, the NBK Replaces the Dayton 6FHX8 (4C446) Blowers, mounts in any position and operates with minimal noise and vibration to maintain CFM at higher static pressures. This is probably the most used blower in the outdoor wood...
(This Fan is used on the Shaver Wood Furnace) Also used for many other applications. .This fan is cross referenced with the models below:Dayton 1C180, 4C440, 1TDN7, Fasco 7021-3466, 50747-D401, 50747-D500, 6FHX4, 7021-7841 (England Stove), 7021-9258 (NESCO), 7021-8768, Lopi Coal...
Product DescriptionDynamically balanced, the NBK Blower Replaces Dayton 1TDT2 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Note: Not for use with speed controllersPerformance Data CFM @ 0.000-In SP:...
Product DescriptionDynamically balanced, the NBK Blower Replaces Dayton Models 1TDR3 (4C447) Blower mounts in any position and operates with minimal noise and vibration to maintain CFM at higher static pressures. Dayton Blowers 1TDR3 PSC Draft Fan Blower, 115 Volt. The...
Product DescriptionThis OEM blower features a rectangular outlet shape and is designed with a flange. It features a shaded-pole motor and a totally enclosed motor enclosure. It offers all-position mounting. Steel housing material with painted housing finish.Typical ApplicationsThis Fan is...
Product DescriptionDynamically balanced, the NBK replaces Dayton Blower 1TDP1 blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection,...
Product DescriptionNBK Blower replaces Fasco A166 702111307 / 7021-11307- Direct Drive, CFM 145, Amps 0.68/0.75. 115 V. 50 / 60 HZ. RPM 2720/3120 single speed, sleeve bearing, thermally protected, shaded pole. It is suitable for use in heating and ventilation...
WHAT ARE YOU LOOKING FOR?
Search for "{{ result }}"
Thanks for subscribing!
Thanks for contacting us. We'll get back to you as soon as possible.